Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2000 Hyundai Tiburon L4-2.0LFACTORY OEM SERVICE PROCEDURE
Cylinder Block Specifications
GENERAL SPECIFICATIONS
1 of 4
2 of 4
3 of 4
4 of 4
Cylinder Block Surface Variation
Standard 0.05 mm (0.0020 in.) or less
Limit 0.1 mm (0.004 in.)
Oil Clearance
Main Bearing 0.028 - 0.048 mm (0.0011 - 0.0018 in.)
Limit 0.1 mm (0.004 in.)
οΏ½C2:
1 of 4
2 of 4
οΏ½οΏ½2:
3 of 4
' 2:
4 of 4
Cylinder Block Surface Variation
Standard 0.05 mm (0.0020 in.) or less
Limit 0.1 mm (0.004 in.)
Oil Clearance
Main Bearing 0.028 - 0.048 mm (0.0011 - 0.0018 in.)
Limit 0.1 mm (0.004 in.)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.