Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON L4-1.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSSUSPENSIONCONTROL ARMSYSTEM SPECIFICATIONSFRONT
1998 Hyundai Tiburon L4-1.8L
Front
1998 Hyundai Tiburon L4-1.8LSECTION Front
GENERAL SPECIFICATIONS
Ball Joint Rotating Torque 2-10 Nm (17.7-88.5 inch lbs.)
TIGHTENING SPECIFICATIONS
Lower Arm:
Self Locking Nut 125-155 Nm (92-114 ft. lbs.)
Ball Joint To Knuckle 60-72 Nm (44-53 ft. lbs.)
Bushing A Mounting Bolt 100-120 Nm (72-87 ft. lbs.)
Rod Bushing Mounting Bolt 80-100 Nm (58-72 ft. lbs.)
Rod Bushing Mounting Nut 35-45 Nm (25-33 ft. lbs.)
Ball Joint Rotating Torque 2-10 Nm (17.7-88.5 inch lbs.)
TIGHTENING SPECIFICATIONS
Lower Arm:
Self Locking Nut 125-155 Nm (92-114 ft. lbs.)
Ball Joint To Knuckle 60-72 Nm (44-53 ft. lbs.)
Bushing A Mounting Bolt 100-120 Nm (72-87 ft. lbs.)
Rod Bushing Mounting Bolt 80-100 Nm (58-72 ft. lbs.)
Rod Bushing Mounting Nut 35-45 Nm (25-33 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.