Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON L4-1.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSGENERAL SPECIFICATIONS
1998 Hyundai Tiburon L4-1.8L
General Specifications
1998 Hyundai Tiburon L4-1.8LSECTION General Specifications
Type In-line, Double Over Head Camshaft
Number Of Cylinders 4
Engine Code [G4GM]:
Bore 82.00 mm (3.2280 inch)
Stroke 85.00 mm (3.3460 inch)
Total Displacement 1795 cc (109.54 CID)
Compression Ratio 10.0 to 1
Firing Order 1-3-4-2
Number Of Cylinders 4
Engine Code [G4GM]:
Bore 82.00 mm (3.2280 inch)
Stroke 85.00 mm (3.3460 inch)
Total Displacement 1795 cc (109.54 CID)
Compression Ratio 10.0 to 1
Firing Order 1-3-4-2
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.