Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON L4-1.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCYLINDER BLOCK SPECIFICATIONS
1998 Hyundai Tiburon L4-1.8L
Cylinder Block Specifications
1998 Hyundai Tiburon L4-1.8LSECTION Cylinder Block Specifications
GENERAL SPECIFICATIONS
1 of 4
2 of 4
3 of 4
4 of 4
Cylinder Block Surface Variation
Standard 0.05 mm (0.0020 in.) or less
Limit 0.1 mm (0.004 in.)
Oil Clearance
Main Bearing 0.028 - 0.048 mm (0.0011 - 0.0018 in.)
Limit 0.1 mm (0.004 in.)
�C2:
1 of 4
2 of 4
��2:
3 of 4
' 2:
4 of 4
Cylinder Block Surface Variation
Standard 0.05 mm (0.0020 in.) or less
Limit 0.1 mm (0.004 in.)
Oil Clearance
Main Bearing 0.028 - 0.048 mm (0.0011 - 0.0018 in.)
Limit 0.1 mm (0.004 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.