Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON BASE, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SPECIFICATIONSSERVICE INTERVALS & SPECIFICATIONSREPLACEMENT INTERVALS
1998 Hyundai Tiburon Base, Standard
Replacement Intervals
1998 Hyundai Tiburon Base, StandardSECTION Replacement Intervals
REPLACEMENT INTERVALS (1)
| Component | Months | Miles | |||||
|---|---|---|---|---|---|---|---|
| Accessory Drive Belts | |||||||
| Normal/Severe Service | 48 | 60,000 | |||||
| Air Filter | |||||||
| Normal/Severe Service | (1) 24 | (1) 30,000 | |||||
| Automatic Transmission Fluid & Filter | |||||||
| Normal Service | 24 | 30,000 | |||||
| Severe Service | 10 | 15,000 | |||||
| Brake Fluid Normal/Severe Service | 24 | 30,000 | |||||
| Coolant Normal/Severe Service | 24 | 30,000 | |||||
| Engine Oil & Filter | |||||||
| Normal Service | 6 | 7,500 | |||||
| Severe Service | 3 | 3,000 | |||||
| Fuel Filter Normal/Severe Service | (1) 42 | (1) 52,500 | |||||
| Manual Transmission Fluid Normal/Severe Service | (2) 24 | (2) 30,000 | |||||
| PCV Valve (2) Normal/Severe Service | (2) 42 | (2) 52,500 | |||||
| Spark Plugs | |||||||
| Normal Service | 24 | 30,000 | |||||
| Severe Service | 18 | 24,000 | |||||
| Timing Belt Normal/Severe Service | 48 | 60,000 | |||||
|
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.