Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON BASE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONAUTOMATIC TRANSSHIFT INTERLOCK SYSTEMSSYSTEM TESTSSHIFT LOCK SYSTEM
1998 Hyundai Tiburon Base, Automatic
Shift Lock System
1998 Hyundai Tiburon Base, AutomaticSECTION Shift Lock System
- To check system operation, turn ignition on. Depress release button on side of gearshift lever.
- With brake pedal released, gearshift lever should not move from Park. Depress brake pedal. With release button depressed, gearshift lever should now move from Park.
- If shift lock system operation is not as specified, check brakelight switch and shift lock solenoid. See BRAKELIGHT SWITCH and SHIFT LOCK SOLENOID under COMPONENT TESTS. If necessary, check wiring and ground connections. See WIRING DIAGRAMS .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.