Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON BASE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
1998 Hyundai Tiburon Base, Automatic
Quick Lookups: Fluids
1998 Hyundai Tiburon Base, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.40 OZS. | 0.18 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.61 LBS. | 0.73 KG | R-134a | S | |||
| Automatic Transmission Fluid | 6.90 QTS. | 6.52 L | Automatic Transmission Fluid Type 7176 | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | As required. | S | ||
| Engine Coolant | 6.30 QTS. | 5.96 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S | ||
| Engine Oil | 4.20 QTS. | 3.97 L | API - SAE 20W-40/50 (32Deg.F to Above 120Deg.F), 10W-30/40/50 (-10Deg.F to Above 120Deg.F), 5W-30/40 (Below -20Deg.F to 60Deg.F) | S | |||
| Fuel Tank | 14.50 GALS. | 54.88 L | S | ||||
| Manual Transmission Fluid | 2.28 QTS. | 2.15 L | API - GL-4, SAE 75W, 85W | S | |||
| Power Steering Fluid | 0.95 QTS. | 0.89 L | Automatic Transmission Fluid DEXRON II or TEXAMATIC Fluid DEXRON II Type (HONAM CALTEX, KOREA) | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.