Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1998TIBURON BASE, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SPECIFICATIONSMECHANICAL CHECKSENGINE COMPRESSION
1998 Hyundai Tiburon Base, Automatic
Engine Compression
1998 Hyundai Tiburon Base, AutomaticSECTION Engine Compression
Check engine compression with engine at normal operating temperature at specified cranking speed, all spark plugs removed and throttle wide open.
COMPRESSION SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Compression Ratio | |||
| Accent (1.5L) | 10.0:1 | ||
| Elantra (1.8L) | 10.0:1 | ||
| Sonata | |||
| 2.0L | 9.0:1 | ||
| 3.0L | 8.9:1 | ||
| Tiburon (2.0L) | 10.3:1 | ||
| Compression Pressure | |||
| Accent (1.5L) | 234 psi (1613 kPa) | ||
| Elantra (1.8L) | 213 psi (1468 kPa) | ||
| Sonata | |||
| 2.0L | 171 psi (1188 kPa) | ||
| 3.0L | 170 psi (1172 kPa) | ||
| Tiburon (2.0L) | 213 psi (1468 kPa) | ||
| Maximum Variation Between Cylinders All Models | 14 psi (97 kPa) | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.