Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1994ELANTRA L4-1.8LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSENGINE SPECIFICATIONSVALVE SPECIFICATIONS
1994 Hyundai Elantra L4-1.8L
Valve Specifications
1994 Hyundai Elantra L4-1.8LSECTION Valve Specifications
Stem Diameter, inch:
Intake 0.2585-0.2591
Exhaust 0.2571-0.2579
Clearance, inch:
Intake [02]
Exhaust [02]
Face Angle, Degrees 45-45.5
Margin [01]
[01] -- Intake, 0.028 inch; exhaust, 0.040 inch
[02] -- Equipped with hydraulic valve lash adjusters, no adjustment is required.
Intake 0.2585-0.2591
Exhaust 0.2571-0.2579
Clearance, inch:
Intake [02]
Exhaust [02]
Face Angle, Degrees 45-45.5
Margin [01]
[01] -- Intake, 0.028 inch; exhaust, 0.040 inch
[02] -- Equipped with hydraulic valve lash adjusters, no adjustment is required.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.