Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Hyundai Excel GL, StandardFACTORY OEM SERVICE PROCEDURE
ECM Main Relay (SCOUPE)
- Relay is located behind driver's dash panel, near ECM. Disconnect harness connector. Removal of relay may assist in testing. Apply battery voltage to terminal No. 4 (positive) and ground terminal No. 2 (negative). See Fig 1 .
- Using a DVOM, check for continuity between terminal No. 1 and terminal No. 5. Continuity should exist. Check for continuity between terminal No. 5 and terminal No. 3. Replace relay if continuity does not exist.
- Disconnect relay harness connector. Using DVOM, measure voltage between relay harness connector terminals No. 4 and 5 (White/Blue wires) and vehicle ground. If battery voltage is not present, inspect and repair circuit.
- Ensure ignition is off. Disconnect ECM harness connector. Connect jumper wire between ECM harness connector terminal No. 36 and vehicle ground. See Figure . Using ohmmeter, check resistance between relay harness connector terminal No. 2 (Black/Green wire) and vehicle ground. If continuity does not exist, inspect and repair circuit as needed.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
