1992 Hyundai Excel GL, AutomaticFACTORY OEM SERVICE PROCEDURE

Engine Lacks Power

  • Check throttle cable adjustment.
  • Verify air intake system is not restricted.
  • Check EGR system for correct operation.
  • Ensure fuel system pressure is correct. Use ohmmeter to verify correct fuel injector resistance.
  • Ensure base timing is correct and timing advance system is functional.
  • Check purge control valve operation.
  • Check vacuum switching valve operation.
  • Check throttle position sensor operation.
  • Check coolant temperature sensor operation.
  • Verify throttle valve opens completely when accelerator pedal is fully applied.
  • Check transmission for correct downshift (A/T).
  • Check exhaust system for restriction.
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.