Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Hyundai Excel GL, AutomaticFACTORY OEM SERVICE PROCEDURE
Retrieving Codes
NOTE:
Ensure battery voltage is proper before retrieving codes.
- Turn ignition switch to OFF position. Connect a voltmeter between ground terminal and MPI diagnostic terminal of diagnostic connector, or connect Multi-Use Tester (MUT) Scan Tool (09391-33200 ) to diagnostic connector and cigarette lighter. See Fig 1 . Turn ignition switch to ON position. Trouble codes stored in ECU memory (fault codes) will be displayed.
- If using voltmeter to retrieve fault codes, it is important that voltage signals are accurately timed. Signals will appear in long and short pulses. Long pulses represent first digit of fault code. Short pulses represent second digit. For example, one long pulse followed by 5 short pulses represents Code 15.
- If using scan tool and malfunction indicator light comes on while various checks are being made, check self-diagnostic output.
- After all checks have been made and/or trouble codes have been recorded, make necessary repairs. See CODE CHARTS. After repairs have been made, retest component(s) to ensure problem has been corrected.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
