Valve Clearance: Excel

1990 Hyundai Excel Base, 2D Hatchback, StandardSECTION Excel
  1. Ensure head bolts are properly tightened before adjusting valves. Ensure engine is at normal operating temperature. Rotate crankshaft clockwise to position cylinder No. 1 on TDC of compression stroke.
  2. Adjust intake valves on cylinders No. 1 and 2, and exhaust valves on cylinders No. 1 and 3. Rotate crankshaft clockwise 360 degrees to position cylinders No. 4 on TDC of compression stroke.
  3. Adjust intake valves on cylinders No. 3 and 4, and exhaust valves on cylinders No. 2 and 4. See VALVE CLEARANCE SPECIFICATIONSΒ  table.
VALVE CLEARANCE SPECIFICATIONS (1)

Application In. (mm)
Hot Engine
Intake .006 (.15)
Exhaust .010 (.25)
Cold Engine
Intake .003 (.07)
Exhaust .007 (.17)
(1) Adjustment may only be done with engine hot.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.