2007 Hummer H3 StandardFACTORY OEM SERVICE PROCEDURE

Engine Electrical Connector End Views: Generator

Fig 1: Generator Connector End View
GM1522871Courtesy of GENERAL MOTORS CORP.
Generator Connector Parts Information

Connector Part Information 
  • OEM: 1-928-403-137
  • Service: See Catalog
  • Description: 2-Way F Timer Junior Power Timer Series Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: 4-964286-1/16
  • Core/Insulation Crimp: E/1
  • Release Tool/Test Probe: 12093647/J-35616-4A (PU)
Generator Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 RD 225 Generator Turn On Signal
2 GY 23 Generator Field Duty Cycle Signal
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.