2007 Hummer H3 L5-3.7LFACTORY OEM SERVICE PROCEDURE

Engine Controls - Reprogramming Warranty Coverage

Bulletin No.: 04-06-04-036B

Date: May 12, 2006

WARRANTY ADMINISTRATION

Subject:
Warranty Coverage for Emission-Related Reprogramming Events (PCM, ECM and TCM)

Models:
2007 and Prior GM Passenger Cars and Trucks (Including Saturn)
2003-2007 HUMMER H2
2006-2007 HUMMER H3

Supercede:

This bulletin is being updated to reflect the appropriate warranty coverage of non-emission related reprogramming. Please discard Corporate Bulletin Number 04-06-04-036A (Section 06 - Engine).

The coverage for emission-related reprogramming has the same coverage as the emission controller under the emission controller warranty - 8 years/80,000 miles (130,000 km).

Reprogramming that is not emissions-related is covered under the terms of the New Vehicle Limited Warranty. (For additional information regarding labor codes for use in non-emission-related reprogramming, refer to Corporate Bulletin Number 06-08-47-001B.)

Emissions-related calibration updates will be announced through a GM Technical Service Bulletin with specific guidelines of coverage for each model affected.

A special emission-related reprogramming labor operation will be used. The labor operation to be used for claims relating to emission-related reprogramming is J6353 and will only be referenced in the bulletins addressing emission-related calibrations. This labor operation must NOT be used for non-emissions-related reprogramming or for any other vehicle that is not referenced in an emission-related reprogramming technical service bulletin.

Example:

The PCM on 2004 model light duty vehicles is covered by the emission controller warranty for 8 years/80,000 miles (130,000 km). If GM released an "emission-related" calibration update for one of these vehicles, this reprogramming event would also be covered for 8 years/80,000 miles (130,000km). If GM released a driveability-related calibration update (for example, to eliminate a hesitation) for one of these vehicles, this reprogramming event would be covered for the terms of the New Vehicle Limited Warranty.

An emission-related calibration for medium duty and diesel applications are also covered by the emission warranty that is applicable to that vehicle's emissions controller.

Example:

The PCM on 2004 model medium duty vehicles is covered by the emission controller warranty for 5 years/50,000 miles (80,000 km). If GM released an "emission-related" calibration update for one of these vehicles, this reprogramming event would also be covered for 5 years/50,000 miles (80,000 km).

Factory service manual diagram




Disclaimer
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.