Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2005 Hummer H2 4D Utility PickupFACTORY OEM SERVICE PROCEDURE
Engine Controls Connector End Views
Accelerator Pedal Position (APP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | - | - | Not Used |
| B | PU | 1272 | 5-Volt Reference |
| C | L-BU | 1162 | APP Sensor 2 Signal |
| D | TN | 1274 | Low Reference |
| E | BN | 1271 | Low Reference |
| F | D-BU | 1161 | APP Sensor 1 Signal |
| G | WH/BK | 1164 | 5-Volt Reference |
| H-K | - | - | Not Used |
Camshaft Position (CMP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BN/WH | 633 | CMP Sensor Signal |
| B | PK/BK | 632 | Low Reference |
| C | RD | 631 | 12-Volt Reference |
Crankshaft Position (CKP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-BU/WH | 1869 | CKP Sensor Signal |
| B | YE/BK | 1868 | Low Reference |
| C | L-GN | 1867 | 12-Volt Reference |
Evaporative Emission (EVAP) Canister Purge Solenoid
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 439 | Ignition 1 Voltage |
| B | D-GN/WH | 428 | EVAP Canister Purge Solenoid Control |
Evaporative Emission (EVAP) Canister Vent Solenoid
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 1310 | EVAP Canister Vent Solenoid Control |
| B | OG | 2640 | Battery Positive Voltage |
Fuel Injector 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1039 | Ignition 1 Voltage |
| B | BK | 1744 | Fuel Injector 1 Control |
Fuel Injector 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | L-GN/BK | 1745 | Fuel Injector 2 Control |
Fuel Injector 3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1039 | Ignition 1 Voltage |
| B | PK/BK | 1746 | Fuel Injector 3 Control |
Fuel Injector 4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | L-BU/BK | 844 | Fuel Injector 4 Control |
Fuel Injector 5
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1039 | Ignition 1 Voltage |
| B | BK/WH | 845 | Fuel Injector 5 Control |
Fuel Injector 6
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | YE/BK | 846 | Fuel Injector 6 Control |
Fuel Injector 7
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1039 | Ignition 1 Voltage |
| B | RD/BK | 877 | Fuel Injector 7 Control |
Fuel Injector 8
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | PK | 1239 | Ignition 1 Voltage |
| B | D-BU/WH | 878 | Fuel Injector 8 Control |
Fuel Pump and Sender Assembly
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 2150 | Ground |
| B | PU/WH | 1589 | Fuel Level Sensor Signal |
| C | BK | 470 | Low Reference |
| D | GY | 120 | Fuel Pump Supply Voltage |
Fuel Tank Pressure (FTP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 470 | Low Reference |
| B | D-GN | 890 | Fuel Tank Pressure Sensor Signal |
| C | GY | 474 | 5-Volt Reference |
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN | 1664 | HO2S Low Signal - Bank 1 Sensor 1 |
| B | PU/WH | 1665 | HO2S High Signal - Bank 1 Sensor 1 |
| D | PK | 539 | Ignition 1 Voltage |
| E | BK/WH | 3113 | HO2S Heater Low Control - Bank 1 Sensor 1 |
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN/WH | 1669 | HO2S Low Signal - Bank 1 Sensor 2 |
| B | PU/WH | 1668 | HO2S High Signal - Bank 1 Sensor 2 |
| C | BN | 2391 | HO2S Heater Low Control - Bank 1 Sensor 2 |
| D | PK | 1539 | Ignition 1 Voltage |
Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN | 1667 | HO2S Low Signal - Bank 2 Sensor 1 |
| B | PU | 1666 | HO2S High Signal - Bank 2 Sensor 1 |
| D | PK | 539 | Ignition 1 Voltage |
| E | L-GN | 3212 | HO2S Heater Low Control - Bank 2 Sensor 1 |
Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | TN | 1671 | HO2S Low Signal - Bank 2 Sensor 2 |
| B | PU | 1670 | HO2S High Signal - Bank 2 Sensor 2 |
| C | RD/WH | 3223 | HO2S Heater Low Control - Bank 2 Sensor 2 |
| D | PK | 1539 | Ignition 1 Voltage |
Ignition Coil #1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2129 | Low Reference |
| C | PU | 2121 | IC 1 Control |
| D | PK | 1039 | Ignition 1 Voltage |
Ignition Coil #2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2130 | Low Reference |
| C | RD | 2122 | IC 2 Control |
| D | PK | 1239 | Ignition 1 Voltage |
Ignition Coil #3
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2129 | Low Reference |
| C | L-BU | 2123 | IC 3 Control |
| D | PK | 1039 | Ignition 1 Voltage |
Ignition Coil #4
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2130 | Low Reference |
| C | D-GN | 2124 | IC 4 Control |
| D | PK | 1239 | Ignition 1 Voltage |
Ignition Coil #5
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2129 | Low Reference |
| C | D-GN | 2125 | IC 5 Control |
| D | PK | 1039 | Ignition 1 Voltage |
Ignition Coil #6
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2130 | Low Reference |
| C | L-BU | 2126 | IC 6 Control |
| D | PK | 1239 | Ignition 1 Voltage |
Ignition Coil #7
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2129 | Low Reference |
| C | RD | 2127 | IC 7 Control |
| D | PK | 1039 | Ignition 1 Voltage |
Ignition Coil #8
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | BN | 2130 | Low Reference |
| C | PU | 2128 | IC 8 Control |
| D | PK | 1239 | Ignition 1 Voltage |
Intake Air Temperature (IAT)/Mass Air Flow (MAF) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 552 | Low Reference |
| B | TN | 472 | IAT Sensor Signal |
| C | BK/WH | 451 | Ground |
| D | PK | 439 | Ignition 1 Voltage |
| E | YE | 492 | MAF Sensor Signal |
Knock Sensor - Front
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-BU | 496 | Knock Sensor 1 Signal |
Knock Sensor - Rear
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-BU | 1876 | Knock Sensor 2 Signal |
Manifold Absolute Pressure (MAP) Sensor
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG/BK | 469 | Low Reference |
| B | L-GN | 432 | MAP Sensor Signal |
| C | GY | 597 | 5-Volt Reference |
Throttle Actuator Control (TAC) Assembly
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | YE | 581 | TAC Motor Control - 1 |
| B | OG/BK | 1057 | Low Reference |
| C | BN | 582 | TAC Motor Control - 2 |
| D | BK | 452 | Low Reference |
| E | L-BU/BK | 1688 | 5-Volt Reference |
| F | PU | 486 | TP Sensor 2 Signal |
| G | D-GN | 485 | TP Sensor 1 Signal |
| H | GY | 416 | 5-Volt Reference |
Throttle Actuator Control (TAC) Module C1
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | D-GN | 485 | TP Sensor 1 Signal |
| 2 | GY | 416 | 5-Volt Reference |
| 3 | BK | 452 | Low Reference |
| 4 | D-BU | 84 | Cruise Control Set/Coast Switch Signal |
| 5 | GY/BK | 87 | Cruise Control Resume/Accel Switch Signal |
| 6 | L-BU | 1320 | Stop Lamp Supply Voltage |
| 7 | PK | 1339 | Ignition 1 Voltage |
| 8 | BN | 582 | TAC Motor Control - 2 |
| 9 | L-BU/BK | 1688 | 5-Volt Reference |
| 10 | OG/BK | 1057 | Low Reference |
| 11 | PU | 486 | TP Sensor 2 Signal |
| 12 | OG/BK | 1061 | UART Serial Data |
| 13 | D-BU/WH | 774 | UART Serial Data |
| 14 | GY | 397 | Cruise Control On Switch Signal |
| 15 | BK | 550 | Ground |
| 16 | YE | 581 | TAC Motor Control - 1 |
Throttle Actuator Control (TAC) Module C2
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | - | - | Not Used |
| B | PU | 1272 | 5-Volt Reference |
| C | L-BU | 1162 | APP Sensor 2 Signal |
| D | TN | 1274 | Low Reference |
| E | - | - | Not Used |
| F | D-BU | 1161 | APP Sensor 1 Signal |
| G | WH/BK | 1164 | 5-Volt Reference |
| H | - | - | Not Used |
| J | BN | 1271 | Low Reference |
| K | - | - | Not Used |
Vehicle Speed Sensor (VSS)
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | PU/WH | 821 | VSS High Signal |
| 2 | L-GN/BK | 822 | VSS Low Signal |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.
