WARNING: This page is about a different car, the 2009 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Front Brakes
Brake Pad Lining Minimum Thickness	2.0 mm	0.080 in
Brake Rotor Diameter	296.00 mm	11.654 in
Brake Rotor Discard Thickness*	27.4 mm	1.079 in
Maximum Allowable Lateral Runout	0.06 mm	0.002 in
Maximum Allowable Scoring	1.50 mm	0.059 in
Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rear Brakes
Brake Pad Lining Minimum Thickness	2.0 mm	0.080 in
Brake Rotor Diameter	191 mm	7.520 in
Rotor Discard Thickness *	18.4 mm	0.724 in
Maximum Allowable Lateral Runout	0.06 mm	0.002 in
Maximum Allowable Scoring	1.50 mm	0.059 in
Maximum Allowable Thickness Variation	0.025 mm	0.001 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specifications.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Disc Brake Component Specifications

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?