Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Operating Condition
Start the engine, and let it idle for at least 1 minute. When engine coolant temperature [ECT SENSOR 1] is 14 °F (-10 °C)*1 (6 °F (-15 °C))*2 or less, let the engine idle for at least 4*1 (3)*2 minutes.
*1: 2016 - 2018 model, 2019 - 2021 6-Speed A/T
*2: 2019 - 2021 9-Speed A/T
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.