Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Honda Accord TouringFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | 4.00 OZS. | 0.11 L | PAG ND-OIL 14 | S | ||
| Air Cond Refrigerant | 0.90 LBS. | 0.4 KG | HFO-1234yf (R-1234yf) | S | |||
| Automatic Transmission Fluid | 2.0L Eng,Gas | 4.50 QTS. | 4.25 L | HONDA Automatic Transmission Fluid type 2.0 | S | ||
| Brake Fluid | N/A | N/A | HONDA Heavy Duty Brake Fluid DOT 3 | Or use a DOT 3 or 4 brake fluid as a temporary replacement. | S | ||
| Engine Coolant | 2.0L Eng,Gas | 1.34 GALS. | 5.07 L | HONDA Long-Life Antifreeze/Coolant Type 2 | 50/50 with distilled water. Change including the remaining 0.08 US gal. (0.3l) in reserve tank. | S | |
| Engine Oil | 2.0L Eng,Gas | Drain and Refill,w/Filter | 5.00 QTS. | 4.73 L | Genuine HONDA Motor Oil 0W-20 or API premium grade - SAE 0W-20 Detergent Oil | S | |
| Engine Oil | 2.0L Eng,Gas | Drain and Refill,w/o Filter | 4.60 QTS. | 4.35 L | Genuine HONDA Motor Oil 0W-20 or API premium grade - SAE 0W-20 Detergent Oil | S | |
| Fuel Tank | Gas | 14.80 GALS. | 56.02 L | S | |||
| Windshield Washer Fluid | 2.60 QTS. | 2.46 L | All Weather Windshield Washer Fluid | Use only commercially-available windshield washer fluid. DO NOT use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.