Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2012 Honda Odyssey EXFACTORY OEM SERVICE PROCEDURE

ELD Replacement

Do the battery terminal disconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
Remove the upper cover (A), then remove the two positive (+) terminals (B).

Fig 1: ELD Upper Cover With Positive Terminals And Fuses And Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the fuses (C and D).
Remove the main under-hood fuse box (A) from the bracket.

Fig 2: Identifying ELD Lower Cover With Under-Hood Fuse Box
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the lower cover (B).
Release the two lock tabs (A), then pull the ELD (B) out from the main under-hood fuse box (C).
NOTE: Take care not to damage wire harness.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.