2012 Honda Insight BaseFACTORY OEM SERVICE PROCEDURE

Engine Electrical

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE ELECTRICAL SPECIFICATION

Item Measurement Qualification Standard or New Service Limit
Ignition coil Rated voltage   12V
Firing order   1-3-4-2
Spark plug Type   NGK:DILFR6F11G
Gap   1.0-1.1 mm (0.039-0.043 in) -
Ignition timing At idle Check the red mark In N or P 10±2°BTDC
Drive belt Tension   Auto-tensioner
Starter Output   1.0 kW
Commutator mica depth   0 40-0.50 mm (0.016-0.020 in) 015 mm (0.006 in)
Commutator runout   0.02 mm (0.001 in) max. 0.05 mm (0.002 in)
Commutator O.D.   28.0-28.1 mm (1.102-1.106 in) 27.5 mm (1.083 in)
Brush length   11.1-11.5 mm (0.44-0.45 in) 4.3 mm (0.17 in)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.