2012 Honda Fit Base, Automatic TransFACTORY OEM SERVICE PROCEDURE

System Description: Overview: Notes

WARNING: This page is about a different car, the 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

The audio unit acts as the processor for all audio functions. Select audio functions from the audio unit buttons (on the center panel) or the audio remote switch (on the steering wheel)*. The audio display provides the current audio status. The audio unit also supports playback function of compressed audio files (MP3/WMA) recorded on CD-R/RW.

There is an auxiliary jack (AUX) in the center panel*. The system will accept auxiliary audio input using a 3.5 mm stereo miniplug.

The audio unit has a built-in EEPROM (electrically erasable programmable read-only memory). This memory holds the audio presets (AM/FM radio frequency, sound settings, etc.) even when the battery is disconnected.

A security signal is daisy-chained between the audio and vehicle components and integrated into the vehicle's security system.

Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.