Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
USB Device Does Not Function
- Check the vehicle battery condition first, (see BATTERY TEST )
- Check the connectors for poor connections or loose terminals.
- Check the USB device requirement:
- Mass-storage class ready digital audio player with USB 2.0 port
- More than 256 MB of RAM
- Supports MP3, WMA, and AAC (encoded with the i-Tunes) files, DRM files are not supported
- Not all players and player functions work with the USB adapter. Please see the Owner's Manual for more information. Always test the customers USB device in a known-good vehicle of the same year and trim (if possible). Technologies change and are updated frequently which may result in USB devices working in newer vehicles, but not in older vehicles of the same model.
- Turn the ignition switch to ON (II), and turn on the audio unit.
- Push the AUX button to select USB mode.NOTE: Do not connect the USB device for this step.
Is USB NO DATA displayed?
YES - Go to step 3.
NO - Go to step 8
- Connect the customer's USB device to the USB adapter.
Does the USB device work property?
YES - The USB device is OK at this time. Check for loose or poor connections at the audio unit or the audio-navigation unit and the USB adapter unit. Also check the USB adapter and the USB port.
NO - Go to step 4.
- Turn the ignition switch to LOCK (0).
- Connect the customer's USB device to a known-good vehicle (same year/trim) that is equipped with an USB adapter, and check the USB device operation.
Does the USB device work properly?
YES - Go to step 6.
NO - USB device is faulty. Also check the USB cable and the USB port condition.
- On the customer's vehicle, remove the USB adapter unit (see USB ADAPTER UNIT REPLACEMENT ).
- Disconnect USB adapter unit connector B (5P).
- Check for continuity between the terminals of USB adapter unit connector B (5P) and USB adapter 5P connector according to the table.CONTINUITY REFERENCE CHARTCONTINUITY REFERENCE CHARTCONTINUITY REFERENCE CHART
USB adapter unit connector USB adapter connector B1 1 B2 2 B3 3 B4 4
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
