Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Honda Insight BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 2.70 OZS. | 0.07 L | PAG SP-10 | S | |||
| Air Cond Refrigerant | 1.04 LBS. | 0.47 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill | 3.00 QTS. | 2.83 L | HONDA CVT Fluid | DO NOT mix Honda CVTF with other transmission fluids. Using a transmission fluid other than Honda CVTF may adversely affect the operation and durability of your vehicle's transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda CVTF is not covered by Honda's new vehicle warranty. | S | |
| Automatic Transmission Fluid | Total Capacity | 5.50 QTS. | 5.2 L | HONDA CVT Fluid | DO NOT mix Honda CVTF with other transmission fluids. Using a transmission fluid other than Honda CVTF may adversely affect the operation and durability of your vehicle's transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda CVTF is not covered by Honda's new vehicle warranty. | S | |
| Brake Fluid | N/A | N/A | HONDA Heavy Duty Brake Fluid DOT 3 | If DOT 3 Brake Fluid is not available, then DOT 4 or DOT4+ is acceptable. Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage. | S | ||
| Engine Coolant | Drain and Refill | 4.81 QTS. | 4.55 L | HONDA Long-life Antifreeze/Coolant Type 2 | This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water. Includes: the coolant in the reserve tank and that remaining in the engine. If you regularly drive your vehicle under severe conditions in very low temperature (under 31Deg.F, 35Deg.C), a higher concentration of coolant should be used. | S | |
| Engine Coolant | Total Capacity | 5.33 QTS. | 5.04 L | HONDA Long-life Antifreeze/Coolant Type 2 | This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water. If you regularly drive your vehicle under severe conditions in very low temperature (under 31Deg.F, 35Deg.C), a higher concentration of coolant should be used. | S | |
| Engine Oil | Drain and Refill,w/Filter | 3.40 QTS. | 3.21 L | API - SAE 0W-20 Detergent Oil | Excluding the oil remaining in the engine. You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Engine Oil | Drain and Refill,w/o Filter | 3.20 QTS. | 3.02 L | API - SAE 0W-20 Detergent Oil | Excluding the oil remaining in the engine. You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Engine Oil | Total Capacity | 4.00 QTS. | 3.78 L | API - SAE 0W-20 Detergent Oil | You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Fuel Tank | 10.60 GALS. | 40.12 L | S | ||||
| Power Steering Fluid | N/A | N/A | HONDA Power Steering Fluid | DO NOT use Automatic Transmission Fluid. | S | ||
| Windshield Washer Fluid | 2.60 QTS. | 2.46 L | All Weather Windshield Washer Fluid | DO NOT use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.