2011 Honda Fit Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Torque Specifications - General: Suspension

SUSPENSION SPECIFICATIONS CHART

Location Item Remark Torque
Front suspension Wheel nuts Β  108 N.m (11.0 kgf.m, 80 lbf.ft)
Knuckle damper pinch bolts/nuts Use new bolts/nuts 90 N.m (9.2 kgf.m, 66 lbf.ft)
Lower arm ball joint castle nut Use new nut 64 - 74 N.m (6.5 - 7.5 kgf.m, 47 - 55 lbf.ft)
Lower arm bolts Use new bolts 93 N.m (9.5 kgf.m, 69 lbf.ft)
Stabilizer bar bushing holders flange bolts Β  22 N.m (2.2 kgf.m, 16 lbf.ft)
Stabilizer link flange nut (to damper) Use new nut 29 N.m (3.0 kgf.m, 22 lbf.ft)
Stabilizer link self-locking nut (to stabilizer bar) Use new nut 38 N.m (3.9 kgf.m, 28 lbf.ft)
Damper upper nut Β  44 N.m (4.5 kgf.m, 32 lbf.ft)
Rear suspension Wheel nuts Β  108 N.m (11.0 kgf.m, 80 lbf.ft)
Axle beam bolts Use new bolts 93 N.m (9.5 kgf.m, 69 lbf.ft)
Damper lower flange bolt Use new bolt 54 N.m (5.5 kgf.m, 40 lbf.ft)
Damper upper self-locking nut Use new nut 29 N.m (3.0 kgf.m, 22 lbf.ft)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.