Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Honda Fit Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Fuel Emissions
FUEL EMISSIONS SPECIFICATIONS CHART
| Location | Item | Remark | Torque |
|---|---|---|---|
| Fuel and emissions | A/F sensor | 44 N.m (4.5 kgf.m, 33 lbf.ft) | |
| ECT Sensor 1 | 12 N.m (1.2 kgf.m, 8.7 lbf.ft) | ||
| EGR pipe bolts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| EGR pipe nuts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| EGR valve nuts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Fuel tank locknut*2 | 70 N.m (7.1 kgf.m, 51 lbf.ft) | ||
| Fuel tank support straps bolts | 38 N.m (3.9 kgf.m, 28 lbf.ft) | ||
| Knock sensor | 32 N.m (3.3 kgf.m, 24 lbf.ft) | ||
| PCV Valve | 44 N.m (4.5 kgf.m, 33 lbf.ft) | ||
| Rocker arm oil pressure switch | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Secondary HO2S | 44 N.m (4.5 kgf.m, 33 lbf.ft) | ||
| Tank mount bracket bolts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Throttle body bolts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Under floor three way converter cover self-locking nuts | Use new nuts | 33 N.m (3.4 kgf.m, 25 lbf.ft) | |
| Warm up three way catalytic converter bracket bolt | 44 N.m (4.5 kgf.m, 33 lbf.ft) | ||
| Warm up three way catalytic converter lower bolts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Warm up three way catalytic converter upper bolts | 31 N.m (3.2 kgf.m, 23 lbf.ft) | ||
| Warm up three way catalytic converter upper nuts | 31 N.m (3.2 kgf.m, 23 lbf.ft) | ||
| *1: Parts to be tightened in a particular order. *2: Follow the S/M procedures closely for torque, sequence, and special steps. |
|||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.