Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Honda Fit Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Engine Mechanical
ENGINE MECHANICAL SPECIFICATIONS CHART
| Location | Item | Remark | Torque |
|---|---|---|---|
| Engine assembly | Side engine mount bracket nut (14 mm) *1 | Use new nut | 93 N.m (9.5 kgf.m, 69 lbf.ft) |
| Side engine mount bracket nut (12 mm) *1 | Use new nut | 49 N.m (5.0 kgf.m, 36 lbf.ft) | |
| Side engine mount bolts | Use new bolts | 59 N.m (6.0 kgf.m, 43 lbf.ft) | |
| M/T model: Transmission mount bracket bolt *1 | Use new bolt | 54 N.m (5.5 kgf.m, 40 lbf.ft) | |
| A/T model: Transmission mount bracket bolt (12 mm) *1 | Use new bolt | 74 N.m (7.5 kgf.m, 54 lbf.ft) | |
| A/T model: Transmission mount bracket bolt (10 mm) *1 | Use new bolt | 54 N.m (5.5 kgf.m, 40 lbf.ft) | |
| Transmission mount bracket nuts *1 | Use new nuts | 74 N.m (7.5 kgf.m, 54 lbf.ft) | |
| Transmission mount bolts *1 | Use new bolts | 59 N.m (6.0 kgf.m, 43 lbf.ft) | |
| M/T model: Torque rod bracket bolt (14 mm) | Use new bolt | 83 N.m (8.5 kgf.m, 61 lbf.ft) | |
| M/T model: Torque rod bracket bolts (12 mm) | 83 N.m (8.5 kgf.m, 61 lbf.ft) | ||
| A/T model: Torque rod bracket bolt (12 mm) | 83 N.m (8.5 kgf.m, 61 lbf.ft) | ||
| A/T model: Torque rod bracket bolts (10 mm) | Use new bolts | 44 N.m (4.5 kgf.m, 33 lbf.ft) | |
| Torque rod bolt *1 | Use new bolt | 83 N.m (8.5 kgf.m, 61 lbf.ft) | |
| Torque rod nut *1 | Use new nut | 93 N.m (9.5 kgf.m, 69 lbf.ft) | |
| Engine lubrication | Oil filter | 12 N.m (1.2 kgf.m, 9 lbf.ft) | |
| Oil filter feed pipe | Use oil on threads | 39 N.m (4.0 kgf.m, 29 lbf.ft) | |
| Oil pan drain bolt | Use new washer | 39 N.m (4.0 kgf.m, 29 lbf.ft) | |
| Oil pressure switch | Use liquid gasket on threads | 18 N.m (1.8 kgf.m, 13 lbf.ft) | |
| Intake manifold and exhaust system | Intake manifold chamber bolts *2 | 24 N.m (2.4 kgf.m, 17 lbf.ft) | |
| Intake manifold bolts *2 | 24 N.m (2.4 kgf.m, 17 lbf.ft) | ||
| Intake manifold nuts *2 | 24 N.m (2.4 kgf.m, 17 lbf.ft) | ||
| Exhaust pipe B self-locking nuts | Use new nuts | 33 N.m (3.4 kgf.m, 25 lbf.ft) | |
| Muffler bolts*2 | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| *1: Parts to be tightened in a particular order. *2: Follow the S/M procedures closely for torque, sequence, and special steps. |
|||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.