2011 Honda Fit Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Torque Specifications - General: Clutch

CLUTCH SPECIFICATIONS CHART

Location Item Remark Torque
Clutch Clutch pedal nut Β  13 N.m (1.3 kgf.m, 9.4 lbf.ft)
Clutch pedal position switch locknuts Β  9.8 N.m (1.0 kgf.m, 7.2 lbf.ft)
Master cylinder nuts Β  13 N.m (1.3 kgf.m, 9.4 lbf.ft)
Master cylinder push rod nut Β  9.8 N.m (1.0 kgf.m, 7.2 lbf.ft)
Clutch line flare nuts Β  15 N.m (1.5 kgf.m, 11 lbf.ft)
Slave cylinder bolts Β  22 N.m (2.2 kgf.m, 16 lbf.ft)
Flywheel bolts*2 Use oil on the seating surface 118 N.m (12 kgf.m, 87 lbf.ft)
Pressure plate bolts*1 Β  25 N.m (2.6 kgf.m, 19 lbf.ft)
Release fork bolt Β  29 N.m (3.0 kgf.m, 22 lbf.ft)
*1: Parts to be tightened in a particular order.
*2: Follow the S/M procedures closely for torque, sequence, and special steps.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.