Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Honda Element EX, 2.4 YH2FACTORY OEM SERVICE PROCEDURE
Torque Specifications - General: Steering
STEERING SPECIFICATIONS CHART
| Location | Item | Remark | Torque |
|---|---|---|---|
| Steering | Steering wheel nut | 39 N.m (4.0 kgf.m, 29 lbf.ft) | |
| Steering joint bolts | 28 N.m (2.9 kgf.m, 21 lbf.ft) | ||
| Steering column bolts | 16 N.m (1.6 kgf.m, 12 lbf.ft) | ||
| Steering column nuts | 16 N.m (1.6 kgf.m, 12 lbf.ft) | ||
| Steering pump bolts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Steering gearbox bolts | 62 N.m (6.3 kgf.m, 46 lbf.ft) | ||
| Steering gearbox cushion bracket bolt | 62 N.m (6.3 kgf.m, 46 lbf.ft) | ||
| Steering gearbox cushion bracket nut | 62 N.m (6.3 kgf.m, 46 lbf.ft) | ||
| Tie-rod end nuts | 54 N.m (5.5 kgf.m, 40 lbf.ft) | ||
| Tie-rod end lock nuts | 44 N.m (4.5 kgf.m, 33 lbf.ft) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.