2011 Honda Civic GXFACTORY OEM SERVICE PROCEDURE

Torque Specifications - General (GX): Steering

STEERING SPECIFICATIONS CHART

Location Item Remark Torque
Steering Steering wheel bolt   39 N.m (4.0 kgf.m, 29 lbf.ft)
Steering joint bolts   28 N.m (2.9 kgf.m, 21 lbf.ft)
Steering column bolts   22 N.m (2.2 kgf.m, 16 lbf.ft)
Steering column nuts   13 N.m (1.3 kgf.m, 9.4 lbf.ft)
Steering gearbox bolts   59 N.m (6.0 kgf.m, 43 lbf.ft)
Steering gearbox stiffener bolts   54 N.m (5.5 kgf.m, 40 lbf.ft)
Steering gearbox cushion bracket bolts   38 N.m (3.9 kgf.m, 28 lbf.ft)
Tie-rod end nuts   54 N.m (5.5 kgf.m, 40 lbf.ft)
Tie-rod end lock nuts   44 N.m (4.5 kgf.m, 33 lbf.ft)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.