Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2010CROSSTOUR 2WD V6-3.5LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTIGNITION SYSTEMSPARK PLUGTECHNICAL SERVICE BULLETINSCUSTOMER INTERESTENGINE CONTROLS - MIL ON/DTC'S P0300 THROUGH P0304 SET
2010 Honda Crosstour 2WD V6-3.5L
Engine Controls - MIL ON/DTC's P0300 Through P0304 Set
2010 Honda Crosstour 2WD V6-3.5LSECTION Engine Controls - MIL ON/DTC's P0300 Through P0304 Set
10-033
April 18, 2012
Applies To:
2008-10 Accord V6 with AT - ALL
*2011 Accord 2-Door V6 - From VIN 1HGC.....BA000001 thru 1HGC.....BA005807
2011 Accord 4-Door V6 - From VIN 1HGC.....BA000001 thru 1HGC.....BA016920
2010 Accord Crosstour - ALL
2011 Accord Crosstour 2WD - From VIN 5J6TF1H5.BL000001 thru 5J6TF1H5.BL001637
2011 Accord Crosstour 4WD - From VIN 5J6TF2H5.BL000001 thru 5J6TF2H5.BL003256*
MIL Comes On With DTC P0300 Thru P0304
(Supersedes 10-033, dated April 18, 2012, to revise the information marked by the asterisks)
REVISION SUMMARY
*In Applies To, the ending VIN ranges were changed.*
SYMPTOM
One or more spark plugs may be fouled, and the MIL comes on with at least one of these DTCs: P0300 (random cylinder misfire detected), P0301, P0302, P0303, or P0304 (No. 1 thru No. 4 cylinder misfire detected).
CORRECTIVE ACTION
Update the PCM, and replace any fouled spark plugs.
PARTS INFORMATION
Spark Plug:
P/N 12290-R70-A01 (except PZEV)
P/N 12290-R71-L01 (PZEV)
SOFTWARE INFORMATION
HDS Software Version:
2.024.009 or later.
HDS Control Module (CM) Update:
Database Update 29-NOV-2010 or later.
NOTE:
To avoid an incorrect repair that would not be covered under warranty, use the software version listed above or a later version.
The updated PGM-FI software program IDs and P/Ns are listed below. If the HDS or MVCI is loaded with the latest software, and it displays No Update Needed during the update, the software for this service bulletin is already installed.
WARRANTY CLAIM INFORMATION
The normal warranty applies.
*Failed Part: P/N 37820-R70-A74*
Defect Code: 03214
Symptom Code: 03203
Skill Level: Repair Technician
DIAGNOSIS
Inspect the Freeze Data or On Board Snapshot data using the HDS for DTCs P0300, P0301, P0302, P0303, or P0304, and inspect the spark plugs in cylinders 1 thru 4 for carbon buildup.
Is at least one of the listed DTCs present, and is at least one spark plug fouled?
Yes - Go to REPAIR PROCEDURE.
No - This service bulletin does not apply. Continue with normal troubleshooting.
REPAIR PROCEDURE
1. Replace any fouled spark plugs. Torque the plugs to 22 N.m (16 lb-ft).
2. Update the PGM-FI software. Refer to Service Bulletin 01-023, Updating Control Units/Modules.
Disclaimer
April 18, 2012
Applies To:
2008-10 Accord V6 with AT - ALL
*2011 Accord 2-Door V6 - From VIN 1HGC.....BA000001 thru 1HGC.....BA005807
2011 Accord 4-Door V6 - From VIN 1HGC.....BA000001 thru 1HGC.....BA016920
2010 Accord Crosstour - ALL
2011 Accord Crosstour 2WD - From VIN 5J6TF1H5.BL000001 thru 5J6TF1H5.BL001637
2011 Accord Crosstour 4WD - From VIN 5J6TF2H5.BL000001 thru 5J6TF2H5.BL003256*
MIL Comes On With DTC P0300 Thru P0304
(Supersedes 10-033, dated April 18, 2012, to revise the information marked by the asterisks)
REVISION SUMMARY
*In Applies To, the ending VIN ranges were changed.*
SYMPTOM
One or more spark plugs may be fouled, and the MIL comes on with at least one of these DTCs: P0300 (random cylinder misfire detected), P0301, P0302, P0303, or P0304 (No. 1 thru No. 4 cylinder misfire detected).
CORRECTIVE ACTION
Update the PCM, and replace any fouled spark plugs.
PARTS INFORMATION
Spark Plug:
P/N 12290-R70-A01 (except PZEV)
P/N 12290-R71-L01 (PZEV)
SOFTWARE INFORMATION
HDS Software Version:
2.024.009 or later.
HDS Control Module (CM) Update:
Database Update 29-NOV-2010 or later.
NOTE:
To avoid an incorrect repair that would not be covered under warranty, use the software version listed above or a later version.
The updated PGM-FI software program IDs and P/Ns are listed below. If the HDS or MVCI is loaded with the latest software, and it displays No Update Needed during the update, the software for this service bulletin is already installed.
WARRANTY CLAIM INFORMATION
The normal warranty applies.
*Failed Part: P/N 37820-R70-A74*
Defect Code: 03214
Symptom Code: 03203
Skill Level: Repair Technician
DIAGNOSIS
Inspect the Freeze Data or On Board Snapshot data using the HDS for DTCs P0300, P0301, P0302, P0303, or P0304, and inspect the spark plugs in cylinders 1 thru 4 for carbon buildup.
Is at least one of the listed DTCs present, and is at least one spark plug fouled?
Yes - Go to REPAIR PROCEDURE.
No - This service bulletin does not apply. Continue with normal troubleshooting.
REPAIR PROCEDURE
1. Replace any fouled spark plugs. Torque the plugs to 22 N.m (16 lb-ft).
2. Update the PGM-FI software. Refer to Service Bulletin 01-023, Updating Control Units/Modules.
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.