Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Honda Element SC, AutomaticFACTORY OEM SERVICE PROCEDURE
Precision of GPS
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
The precision of the GPS varies according to the number of satellites from which signals are received and the view of the sky. The accuracy is indicated by the color of the GPS icon shown on the display.
GPS DESCRIPTION CHART
| GPS Icon Color | Number of Satellites | Condition | Description |
|---|---|---|---|
| No GPS icon | None | Faulty reception | The GPS can't be utilized due to a faulty GPS receiver, open in the wire, or other fault or interference. |
| 2 or less | Impossible to detect vehicle position | GPS function is normal. The satellite signals received by the GPS are too few to detect the vehicle position. | |
| White GPS icon | 3 | Vehicle position detectable in 2 dimensions | The longitude and latitude of the vehicle position can be detected. (Less precise than detection in three dimensions) |
| Green GPS icon | 4 or more | Vehicle position detectable in 3 dimensions (elevation displayed) | The longitude, latitude and the altitude of the vehicle position can be detected. (More precise than detection in two dimensions) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.