Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2008ELEMENT EX, 2.4 YH2, AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR BODY PANELSBUMPERSFRONT BUMPER DISASSEMBLY/REASSEMBLYSC MODEL ('07-08 MODELS)
2008 Honda Element EX, 2.4 YH2, Automatic
SC Model ('07-08 Models)
2008 Honda Element EX, 2.4 YH2, AutomaticSECTION SC Model ('07-08 Models)
NOTE:
- Take care not to scratch the front bumper faces.
- Put on gloves to protect your hands.
- Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
- Remove the bolt (A) and clips (B) securing the front bumper upper face (C) and the front bumper lower face (D).
- With the help of an assistant, detach the hooks (A) and separate the front bumper upper face (B) from the front bumper lower face (C).
- Reassemble the bumper faces in the reverse order of removal, and note these items:
- Push the clips and hooks into place securely.
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.