Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Honda Ridgeline RTLFACTORY OEM SERVICE PROCEDURE
Using the HDS
- Connect the HDS to the DLC.
- Turn the ignition switch ON (II), then enter the mileage at the prompts.
- Select "BODY ELECTRICAL" from the "System Selection menu."
- From the "BODY ELECTRICAL" System Select menu, select "Power Windows".
- From the "Mode menu", select "Adjustments".
- From the "Adjustment" menu, select "Window P Reset" for driver's side window.
- Follow the prompts on the screen.
- Confirm that the power window control unit is reset by using the driver's power window AUTO UP and AUTO DOWN function.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.