Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Honda Fit Base, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.50 OZS. | 0.16 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.00 LBS. | 0.45 KG | R-134a | S | |||
| Automatic Transmission Fluid | Drain and Refill | 2.60 QTS. | 2.46 L | HONDA Automatic Transmission Fluid DW-1 | Honda has introduced ATF DW-1, a new synthetic ATF that replaces ATF-Z1. DW-1 has been designed to improve cold transmission performance and fuel economy. ATF DW-1 is factory fill for all 2011 and later Honda vehicles equipped with Automatic Transmissions. ATF DW-1 will replace all earlier ATF Fluids. ATF-Z1 may be used in 2010 and older models while it is available. See TSB No. A10110H. | S | |
| Automatic Transmission Fluid | Total Capacity | 6.40 QTS. | 6.05 L | HONDA Automatic Transmission Fluid DW-1 | Honda has introduced ATF DW-1, a new synthetic ATF that replaces ATF-Z1. DW-1 has been designed to improve cold transmission performance and fuel economy. ATF DW-1 is factory fill for all 2011 and later Honda vehicles equipped with Automatic Transmissions. ATF DW-1 will replace all earlier ATF Fluids. ATF-Z1 may be used in 2010 and older models while it is available. See TSB No. A10110H. | S | |
| Brake Fluid | N/A | N/A | HONDA DOT 3 Brake Fluid | Use DOT 4 as a temporary replacement. | S | ||
| Engine Coolant | Automatic Trans | Drain and Refill | 0.98 GALS. | 3.7 L | HONDA Long-life Antifreeze/Coolant Type 2 | This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water. Includes: the coolant in the reserve tank and that remaining in the engine. | S |
| Engine Coolant | Automatic Trans | Total Capacity | 1.40 GALS. | 5.29 L | HONDA Long-life Antifreeze/Coolant Type 2 | This coolant is pre-mixed with 50/50 antifreeze and water. Never add straight antifreeze or plain water. | S |
| Engine Oil | Drain and Refill,w/Filter | 3.80 QTS. | 3.59 L | API - SAE 5W-20 Detergent Oil | Excluding the oil remaining in the engine. You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Engine Oil | Drain and Refill,w/o Filter | 3.60 QTS. | 3.4 L | API - SAE 5W-20 Detergent Oil | Excluding the oil remaining in the engine. You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Engine Oil | Total Capacity | 4.40 QTS. | 4.16 L | API - SAE 5W-20 Detergent Oil | You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S | |
| Fuel Tank | 10.80 GALS. | 40.88 L | S | ||||
| Manual Transmission Fluid | Drain and Refill | 1.60 QTS. | 1.51 L | HONDA Manual Transmission Fluid | Use SAE 10W-30 or 10W-40 viscosity motor oil as a temporary replacement with API Certification seal that says "FOR GASOLINE ENGINES". Motor oils SAE 10W-30 or 10W-40 do not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient. | S | |
| Manual Transmission Fluid | Total Capacity | 1.70 QTS. | 1.6 L | HONDA Manual Transmission Fluid | Use SAE 10W-30 or 10W-40 viscosity motor oil as a temporary replacement with API Certification seal that says "FOR GASOLINE ENGINES". Motor oils SAE 10W-30 or 10W-40 do not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient. | S | |
| Power Steering Fluid | N/A | N/A | HONDA Power Steering Fluid | DO NOT use Automatic Transmission Fluid. | S | ||
| Windshield Washer Fluid | 2.60 QTS. | 2.46 L | All Weather Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.