2007 Honda Element LX, 2.4 YH1, AutomaticFACTORY OEM SERVICE PROCEDURE

Enable Conditions

  1. Stuck at Low temperature
    ENABLE CONDITIONS

    Condition Minimum Maximum
    Battery voltage 11.0 V -
    ATF temperature - -4 °F (-20 °C)
    Initial engine coolant temperature - 95 °F (35 °C)
    Engine coolant temperature 158 °F (70 °C) -
    Throttle position 4.0 ° -
    Vehicle speed 19 mph (30 km/h) -
    No active DTCs P0116, P0117, P0118, P0712, P0713, P0721, P0722
    Other After the engine coolant temperature reaches the fixed value, both the vehicle speed and the throttle position meet the conditions for at least 5 minutes
  2. Stuck at High temperature
    ENABLE CONDITIONS

    Condition Minimum Maximum
    Battery voltage 11.0 V -
    ATF temperature 230 °F (110 °C) -
    Previous engine coolant temperature when the ignition switch was turned OFF 158 °F (70 °C) -
    Present engine coolant temperature when the ignition switch is turned ON - 95 °F (35 °C)
    Engine coolant temperature 158 °F (70 °C) -
    No active DTCs P0116, P0117, P0118, P0712, P0713, P0721, P0722
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.