Air Cleaner Element Inspection/Replacement

2007 Honda Element EX, 2.4 YH1, AutomaticSECTION Air Cleaner Element Inspection/Replacement
  1. Open the air cleaner housing cover (A).
    Fig 1: Identifying Air Cleaner Housing & Air Cleaner Element
    G05449280Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the air cleaner element (B) from the air cleaner housing (C).
  3. Check the air cleaner element for damage or clogging. It the element is damaged or clogged, replace it.
    NOTE: Do not use compressed air to clean the air cleaner element.
  4. Clean and remove any debris from inside the air cleaner housing.
  5. Install the parts in the reverse order of removal.
    NOTE: If the maintenance minder indicated the air cleaner element required replacement, check for other items that may also be displayed in the maintenance minder main items (see MAINTENANCE MAIN ITEMS ) and the sub items (see MAINTENANCE SUB ITEMS ) before resetting the maintenance minder.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.