Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2005CIVIC SI L4-2.0LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINESERVICE SPECIFICATIONS
2005 Honda Civic Si L4-2.0L
Service Specifications
2005 Honda Civic Si L4-2.0LSECTION Service Specifications
Connecting rod
Pin-to-rod clearance
Standard or New 0.005 - 0.015 mm (0.0002 - 0.0006 inch)
Service Limit 0.02 mm (0.0008 inch)
Small-end bore diameter
Standard or New 21.970 - 21.976 mm (0.8650 - 0.8652 inch)
Large-end bore diameter (Normal)
Standard or New 48.0 mm (1.69 inch)
End play installed on crankshaft
Standard or New 0.15 - 0.30 mm (0.006 - 0.012 inch)
Service Limit 0.40 mm (0.016 inch)
Pin-to-rod clearance
Standard or New 0.005 - 0.015 mm (0.0002 - 0.0006 inch)
Service Limit 0.02 mm (0.0008 inch)
Small-end bore diameter
Standard or New 21.970 - 21.976 mm (0.8650 - 0.8652 inch)
Large-end bore diameter (Normal)
Standard or New 48.0 mm (1.69 inch)
End play installed on crankshaft
Standard or New 0.15 - 0.30 mm (0.006 - 0.012 inch)
Service Limit 0.40 mm (0.016 inch)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.