Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2005ACCORD L4-2.4LREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTNAVIGATION SYSTEMNAVIGATION MODULESERVICE AND REPAIRAUDIO-HVAC SUBDISPLAY/CLOCK REPLACEMENT
2005 Honda Accord L4-2.4L
Audio-HVAC Subdisplay/Clock Replacement
2005 Honda Accord L4-2.4LSECTION Audio-HVAC Subdisplay/Clock Replacement
Audio-HVAC Subdisplay/Clock Replacement
With Navigation
1. Remove the upper panel.
2. Remove the two mounting screws.
3. Disconnect the 10P connector (A) from the audio-HVAC subdisplay/clock (B).
4. Install in the reverse order of removal.
With Navigation
1. Remove the upper panel.
2. Remove the two mounting screws.
3. Disconnect the 10P connector (A) from the audio-HVAC subdisplay/clock (B).
4. Install in the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.