Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2004S2000 L4-2.2LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYVALVE GUIDE
2004 Honda S2000 L4-2.2L
Valve Guide
2004 Honda S2000 L4-2.2LSECTION Valve Guide
| Valve guides | I.D. | Intake | Standard or new | 5.510 - 5.530 mm |
| Service limit | 5.55 mm | |||
| Exhaust | Standard or new | 5.510 - 5.530 mm | ||
| Service limit | 5.55 mm | |||
| Installed height | Intake | Standard or new | 15.2 - 16.2 mm | |
| Exhaust | Standard or new | 16.0 - 17.0 mm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.