2004 Honda S2000 L4-2.2LFACTORY OEM SERVICE PROCEDURE

Refrigerant Oil: Service and Repair

A/C Refrigerant Oil Replacement

Recommended PAG oil: KEIHIN SP-10:
- P/N 38897-P13-A01AH: 120 ml (4 fl.oz)
- P/N 38899-P13-A01: 40 ml (1 1/3 fl.oz)

Add the recommended refrigerant oil in the amount listed if you replace any of the following parts.

Factory service manual diagram



Factory service manual diagram



- To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
- Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
- Do not spill the refrigerant oil on the vehicle; it may damage the paint. If it gets on the paint, wash it off immediately.To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.