Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Honda S2000 L4-2.2LFACTORY OEM SERVICE PROCEDURE
Trunk / Liftgate: Adjustments
Trunk Lid
Adjustment
1. Slightly loosen each bolt.
2. Adjust the trunk lid alignment:
- Adjust the trunk lid right and left, as well as forward and rearward, by using the elongated holes on the trunk lid hinges (A).
- Turn the trunk lid edge cushions (B) in or out as necessary to make the trunk lid fit flush with the body at the rear and side edges.
- Adjust the fit between the trunk lid and the trunk lid opening by moving the striker (C).
3. Tighten each bolt securely.
4. Make sure the trunk lid opens properly and locks securely.
5. Apply touch-up paint to the trunk lid mounting bolts and around the hinges.
Adjustment
1. Slightly loosen each bolt.
2. Adjust the trunk lid alignment:
- Adjust the trunk lid right and left, as well as forward and rearward, by using the elongated holes on the trunk lid hinges (A).
- Turn the trunk lid edge cushions (B) in or out as necessary to make the trunk lid fit flush with the body at the rear and side edges.
- Adjust the fit between the trunk lid and the trunk lid opening by moving the striker (C).
3. Tighten each bolt securely.
4. Make sure the trunk lid opens properly and locks securely.
5. Apply touch-up paint to the trunk lid mounting bolts and around the hinges.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.