Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2004 Honda Civic SiFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Gas | 5.00 OZS. | 0.14 L | PAG 46 | S | ||
| Air Cond Refrigerant | 1.15 LBS. | 0.52 KG | R-134a | S | |||
| Brake Fluid | N/A | N/A | HONDA DOT 3 Brake Fluid | Fill to line on reservoir. | S | ||
| Engine Oil | Si | Drain and Refill,w/Filter | 4.60 QTS. | 4.35 L | API - SAE 5W-30 | Excluding the oil remaining in the engine. You may use a SAE 10W-30 oil if the temperature in your area never goes below 20Deg.F (-7Deg.C). You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S |
| Engine Oil | Si | Drain and Refill,w/o Filter | 4.40 QTS. | 4.16 L | API - SAE 5W-30 | Excluding the oil remaining in the engine. You may use a SAE 10W-30 oil if the temperature in your area never goes below 20Deg.F (-7Deg.C). You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S |
| Engine Oil | Si | Total Capacity | 5.80 QTS. | 5.48 L | API - SAE 5W-30 | You may use a SAE 10W-30 oil if the temperature in your area never goes below 20Deg.F (-7Deg.C). You may use a synthetic motor oil if it displays the API Certification Seal, and it is the proper weight. | S |
| Power Steering Fluid | N/A | N/A | HONDA Power Steering Fluid | DO NOT use Automatic Transmission Fluid. | S | ||
| Windshield Washer Fluid | 2.60 QTS. | 2.46 L | All Weather Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.