2002 Honda S2000FACTORY OEM SERVICE PROCEDURE

Low Fuel Indicator Test

  1. Do the fuel gauge sending unit test (see INSTALLATION  ).
    • If the system is OK, go to step 2.
    • If the system has any malfunction, repair it.
  2. Turn the ignition switch ON (II) with the float at E (EMPTY) position.
    • If the low fuel indicator is on, go to step 3.
    • If the low fuel indicator is not on, refer to the low fuel indicator Circuit Diagram, 2000-2003 models (see CIRCUIT DIAGRAM ), 2004-2005 models (see CIRCUIT DIAGRAM ), and check the circuit.
  3. Lift the float above LOW position.
    • If the low fuel indicator goes off, the system is OK.
    • If the low fuel indicator is still on, refer to the low fuel indicator Circuit Diagram, 2000-2003 models (see CIRCUIT DIAGRAM ), 2004-2005 models (see CIRCUIT DIAGRAM ), and check the circuit.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.