Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Honda S2000FACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.00 OZS. | 0.11 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.25 LBS. | 0.56 KG | R-134a | S | |||
| Brake Fluid | N/A | N/A | HONDA DOT 3 Brake Fluid | Fill to line on reservoir. | S | ||
| Differential Gear Oil | Drain and Refill | 0.78 QTS. | 0.73 L | API - GL-5 or GL-6, SAE 90W Hypoid Gear Oil | S | ||
| Differential Gear Oil | Total Capacity | 0.81 QTS. | 0.76 L | API - GL-5 or GL-6, SAE 90W Hypoid Gear Oil | S | ||
| Engine Coolant | Drain and Refill | 1.72 GALS. | 6.51 L | 50/50 mixture of HONDA Antifreeze/Coolant and water | Includes: the coolant in the reserve tank and that remaining in the engine. Reserve tank capacity: 1.6 gal. | S | |
| Engine Coolant | Total Capacity | 2.01 GALS. | 7.6 L | 50/50 mixture of HONDA Antifreeze/Coolant and water | Includes: the coolant in the reserve tank and that remaining in the engine. Reserve tank capacity: 1.6 gal. | S | |
| Engine Oil | Drain and Refill,w/Filter | 5.10 QTS. | 4.82 L | API - SAE 10W-30 | Excluding the oil remaining in the engine. | S | |
| Engine Oil | Drain and Refill,w/o Filter | 4.80 QTS. | 4.54 L | API - SAE 10W-30 | Excluding the oil remaining in the engine. | S | |
| Engine Oil | Total Capacity | 5.90 QTS. | 5.58 L | API - SAE 10W-30 | S | ||
| Fuel Tank | 13.20 GALS. | 49.96 L | S | ||||
| Manual Transmission Fluid | Drain and Refill | 1.60 QTS. | 1.51 L | HONDA Manual Transmission Fluid | Use SAE 10W-30 or 10W-40 viscosity motor oil as a temporary replacement with API Certification seal that says "FOR GASOLINE ENGINES". Motor oils SAE 10W-30 or 10W-40 do not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient. | S | |
| Manual Transmission Fluid | Total Capacity | 1.70 QTS. | 1.6 L | HONDA Manual Transmission Fluid | Use SAE 10W-30 or 10W-40 viscosity motor oil as a temporary replacement with API Certification seal that says "FOR GASOLINE ENGINES". Motor oils SAE 10W-30 or 10W-40 do not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient. | S | |
| Windshield Washer Fluid | 2.70 QTS. | 2.55 L | All Weather Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.