2002 Honda Insight StandardFACTORY OEM SERVICE PROCEDURE

Vehicle Speed Pulse (VSP) Sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle speed pulse (VSP) sensor is driven by the differential gear (2000-01) or the PCM (2002-04). For every revolution of the wheel, a four-pulse signal is sent to the navigation unit. The VSP outputs the distance signal by turning the navigation unit's sensor power on and off.

Fig 1: Pictorial Presentation Of Vehicle Speed Pulse Sensor Signal
G01520439Courtesy of AMERICAN HONDA MOTOR CO., INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.