2002 Honda Insight StandardFACTORY OEM SERVICE PROCEDURE

TCS Operation Mode Table

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: TCS Operation Mode Table
G01502779Courtesy of AMERICAN HONDA MOTOR CO., INC.

On-board Diagnosis Function 

  1. The TCS can be diagnosed with the HDS.
  2. The ALB Checker cannot be used with this system. For air bleeding, and checking wheel sensor signals, use the HDS.
  3. See the HDS help menu for specific operating instructions.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.