2000 Honda Prelude Base, AutomaticFACTORY OEM SERVICE PROCEDURE

Automatic Transmission DTCS

NOTE: Retrieval of some diagnostic codes may require the use of special OEM tester or flash method using instrument cluster indicator. For procedures/testing of codes not shown below, refer to appropriate system article.
AUTOMATIC TRANSMISSION DIAGNOSTIC TROUBLE CODES (DTC) LIST

DTC/Flash Code Description
P0715/15 Lock-Up Clutch Does Not Engage
P0720/9 Lock-Up Clutch Does Not Engage
P0725/11 Lock-Up Clutch Does Not Engage
P0730/41 Fails To Shift, Stuck In 2nd Gear
P0740/40 Lock-Up Clutch Does Not Engage
P0753/7 Fails To Shift, Stuck In 4th Gear
P0758/8 Fails To Shift, Stuck In 4th Gear
P0763/22 Fails To Shift, Stuck In 4th Gear
P1655/37 Lock-Up Clutch Does Not Engage
P1705/5 Fails To Shift Other Than 2nd-3rd Gears, Lock-Up Clutch Does Not Engage
P1706/6 Lock-Up Clutch Does Not Engage
P1709/24 Does Not Shift Into Sequential Sport Shift Mode
P1738/25 No Specific Symptom Present
P1753/1 Lock-Up Clutch Does Not Engage, Fails to Shift (Stuck In 4th Gear)
P1768/16 Fails To Shift (Stuck In 4th Gear), Lock-Up Clutch Does Not Engage
P1773/23 Fails To Shift (Stuck In 4th Gear), Lock-Up Clutch Does Not Engage
P1790/3 Lock-Up Clutch Does Not Engage
P1791/4 Lock-Up Clutch Does Not Engage
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.