2000 Honda InsightFACTORY OEM SERVICE PROCEDURE

Remember To Initialize To Avoid Problems (HSN0805-10)

Publication date: 2005-08-01
Reference number: HSN0805-10

REMEMBER TO INITIALIZE TO AVOID PROBLEMS

REMEMBER TO INITIALIZE TO AVOID PROBLEMS

HONDA SERVICE NEWS

Reference Number(s): HSN0805-10, Date of Issue:  August 1, 2005
HONDA: All Models
CATEGORY: Honda Service News
APPLIES TO: All Models

SERVICE INFORMATION

Honda models are coming out with more and more systems that need some kind of initialization procedure done if power is removed or the battery is disconnected. Doing the idle learn and CKP pattern learn for the ECM/PCM, resetting the power window control unit, and initializing the OPDS unit are some familiar examples of these procedures.

We can't emphasize enough how important it is to do the appropriate initialization procedure. If you don't, you could wind up doing a lot of wasted troubleshooting and repair.

The repair procedures in Honda service publications are written with the appropriate initialization steps. Just follow the procedure steps to the letter, and you can't go wrong.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.