Turn the vehicle to the ON mode.
If system messages are displayed, press the INFOMATION switch (see Fig 1) or Audio Remote/Multi-Information Display Switch to cancel the display until the MAINTENANCE MINDER icon is displayed, then press the SOURCE/ENTER button.
Display shows the remaining engine oil life, and then press and hold the SOURCE/ENTER button for 10 seconds or more. The MAINTENANCE RESET mode appears on the multi-information display.
NOTE: To cancel the MAINTENANCE RESET mode, press the Audio Remote/Multi-Information Display Switch to select CANCEL, then press the SOURCE/ENTER button.
If you wish to reset all the maintenance items shown on the display, select "All Due Items" by pressing the Audio Remote/Multi-Information Display Switch and press the SOURCE/ENTER button. If you reset each maintenance item individually, select an item (complete list of maintenance main items and sub items) you wish to reset by pressing the Audio Remote/Multi-Information Display Switch and press the SOURCE/ENTER button.
The maintenance item codes will disappear, and the engine oil life will reset to 100%.

Fig 1: Resetting Oil Life Display (Steering Wheel Controls)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

With Multi-Information Display